TAMAGAWA TS5667N120 TS5667N120 TS5667N120 TS5667N120 TS5667N120 TS5667N120

TS5667N120

Please contact with “Tommy” for the price

TS5312N616-2000C-T

TS5312N616

TS5217N530

DIH35-5000C/T-P8-L6-5V

OIH100-1024C/T-P2-12V

TS5233N430

DIH48-6000C/T-P8-L6-5V

TS5246N430

TS1857N112

TS5213N551

TS5214N364

TS5312N512-2000C/TOSE.5KN-6-12-108

TS5146N11

BKO-NC6214

TS5214N500

48-2500PA-L6-5V

TS5205N4540IH60-8192C/T-P8-L6-5V

TS3699N172

TS3653N3E8

1510N122

TS3653N1E2

TS5667N120

TS3624N2E3

TS3738N1E7

TS2151N1E45

TS3699N232

TS3653N3E9

2000144

TS3653N2E4

TS5778N155

TS3624N2E4

TS4559N3E15

TS2151N11E45

TS3738N1E7

TS1980N43E12

482048P6L65V

TS3653N2E5

TS5778N157

TS3624N3E5

TS4886N9079E411

TS2640N321E64

TS3738N1E7

TS1980N56E12

60798024

TS3653N2E6

TS5787N10

TS3624N3E6

TS-5008-N-65

TS2641N31E64

TS3741N3E8

TS1981N134E9

610568-1A

TS3653N3E7

TS5850N60

TS3630N1303E9

TS5008N66

TS2650N1E78

TS374

TS1981N53E19

61347

TS3653N3E8

TS5850N64

TS3630N1309E5

TS5010N

TS2650N11E78

TS3762N15E4

TS1981N56E19

TS3653N3E9

TS5850N70

TS3630N1306

TS5013N69

TS2650N101E78

TS4126N1017E235

TS1981N56E19

TS3653N13E9

TS5N2E18

TS3630N1E1

TS5013N61

TS2651N111E78

TS4127N1017E215

V: Voltage 0 V to 10 V
R-4L: resistance (4-wire connection) 10 kΩ
RTD-4L: Thermoresistor
(linear, 4-wire connection)
(temperature measurement)
Pt 100 Klima
Output ranges of SM 334; AI 4/ AO 2 x 12 bit
The "voltage" output type and "0 V to 10 V" output range are set by default at the module.
You can always use this combination of the output type and range without having to program
the SM 334; AO 4 x 2 Bit in STEP 7.
Table 6- 42 Output ranges
Selected type of output Output range
Voltage 0 V to 10 V
See also
Representation of analog values for analog output channels (Page 279)
Set the "disabled" value at the "measurement type" parameter for unused input channels.
This setting reduces module cycle times.
Always short-circuit unused input channels, and connect these to MANA. This optimizes
interference immunity of the analog input module.
To take the unused output channels of SM 334; AI 4/AO 2 x 12 Bit off power, always set
"disabled" argument at the "output type" parameter, and leave the connection open
This chapter describes the technical data and properties of the S7-300 signal modules.
7.1 Module overview
Introduction
The table below summarizes the essential features of the signal modules described in this
chapter. This overview supports you in selecting a module to suit your requirements.
Table 7- 1 Special signal modules: Overview of properties
Number of inputs/outputs
• max. 16 inputs or outputs 1 slot reserved for nonprogrammable
module
• 3 inputs for absolute encoders
(SSI)
• 2 digital inputs for freezing
encoder values
Suitable for... Simulation of:
• 16 inputs or
• 16 outputs or
• 8 inputs and 8 outputs
Dummy for:
• Interface modules
• non-programmable signal
modules
• modules which occupy 2
slots
Position detection using up to
three absolute encoders (SSI)
Encoder types: Absolute encoder
(SSI), message frame
length 13 bits, 21 bits or 25 bits
Data formats: Gray code or
binary code
Isochronous mode
supported
no no yes
Programmable diagnostics
no no no
Diagnostics interrupt no no programmable
Special features Function adjustable with
screwdriver
the mechanical structure and
addressing of the overall configuration
remains unchanged
when DM 370 is replaced with
a different module.
SM 338 does not support absolute
encoders with a monoflop
time > 64 µs
6ES7374-2XH01-0AA0
Properties
Properties of simulator module SM 374; IN/OUT 16:
● Simulation of:
– 16 inputs or
– 16 outputs or
– 8 inputs and 8 outputs (each with the same start addresses!)
● Status displays for the simulation of inputs and outputs
● Function adjustable with screwdriver