TAMAGAWA TS5667N420 TS5667N420 TS5667N420 TS5667N420 TS5667N420 TS5667N420

TS5667N420

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS5013N69

TS2650N101E78

TS4126N1017E235

TS1981N56E19

TS3653N13E9

TS5N2E18

TS3630N1E1

TS5013N61

TS2651N111E78

TS4127N1017E215

TS1982N126E6

TS3653N44E8

TS3630N1E2

TS5013N89

TS2651N181E78

TS4127N1017E235

TS1982N128E6

8001231S

TS3653N4E12

TS5013N64

TS3630N2E3

TS5016N

TS5000N532

TS4231N6E17

TS1982N53E6

800123-2R

TS3653N14E12

TS5420N60

TS3630N2E4

TS5016N60

TS5000N632

TS4231N6E17

TS1982N56E18

TS3653N58E5

TS5778N155

TS3630N3E5

TS5003N632

TS4244N10E24

TS1982N56E18

800123-R-F

TS3653N65E27

TS5208N23

TS3630N101E2

TS5017N56

TS5005N122?

TS4244N3E24

TS1983N146E5

TS3653N81E27

TS2025N471E69

TS3630N102E4

TS5017N60

TS5007N122

TS4502N1000E200

TS1983N146E5

TS3653N78E5

TS2014N181E32

TS3630N22E3

TS5108-N153-5V

TS5007N635

TS4502N1202E200

TS252N30E1

AU6270N103E63

TS3653N94E5

TS5208N141E78

TS3630N22E4

TS5146N10

TS5208N500

TS4502N2000E100

TS3503N11E43

TS3653N181E8

TS3684N1E3

TS3631N1E1

TS5146N11

TS5208N510

TS4503N1000E200

TS3062E3

TS3658N3

TS3684N13E8

TS3636N6

TS-5170-N20

TS5208N530

TS4503N1007E200

TS3092N11E12

AU6550N2062

STEP 7 therefore does not recognize the SM 374 order number. "Simulate" the simulator
module function required for your configuration as follows:
● To use the SM 374 with 16 inputs, define the order number of a digital input module with
16 inputs in STEP 7,
for example: 6ES7321-1BH02-0AA0
● To use the SM 374 with 16 outputs, define the order number of a digital output module
with 16 outputs in STEP 7,
for example: 6ES7322-1BH01-0AA0
● To use the SM 374 with 8 inputs and 8 outputs, define the order number of a digital
input/output module with 8 inputs and 8 outputs in STEP 7,
for example: 6ES7323-1BH00-0AA0
6ES7 370-0AA01-0AA0
Properties
The dummy module DM 370 reserves a slot for a non-configured module. It can be used as
dummy module for:
● Interface modules (without reservation of address space)
● Non-configured signal modules (with reservation of address space)
● Modules which occupy 2 slots (with reservation of address space)
When replacing the dummy module with another S7-300 module, the mechanical assembly
and address assignment/addressing of the entire configuration remain unchanged.
Configuration in STEP 7
Configure the DM 370 dummy module in STEP 7 only if you module for a programmed
signal module. If the module reserves the slot for an interface module, you can discard
module configuration in STEP 7.
Modules which occupy 2 slots
Install two dummy modules for modules which occupy 2 slots. You only reserve the address
space using the dummy module in slot "x", rather than the dummy module in slot "x + 1". For
details of the procedure, see the table below.
The rack can receive up to 8 modules (SM/FM/CP.) When using two dummy modules to
reserve a slot for a module of 80 mm width, you may still install 7 further modules
(SM/FM/CP) because the dummy module only uses the address space for one modul
The table below shows how to set the switch on the rear panel of the module, according to
the module type.
Table 7- 2 Meaning of the switch settings of dummy module DM 370
Switch setting Meaning Use
The dummy module reserves one slot.
The module will not be configured, and
does not use any address space.
• Without active backplane bus: For configurations
where a single slot is physically reserved, with
electrical connection to the S7-300 bus.
• With active backplane bus: no
The dummy module reserves one slot.
The module must be configured and occupies
1 byte in the input address space
(system default: not in the process image.)
For configurations where an addressed slot is reserved.
6ES7 338-4BC01-0AB0
Properties
Properties of position decoder module SM 338; POS-INPUT:
● 3 inputs for the connection of up to three absolute value encoders (SSI), and 2 digital
inputs to freeze encoder values