 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5208N111E78 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| Tamagawa: | Tamagawa | TS5208N111E78: | TS5208N111E78 |
|---|---|---|---|
| Material: | Iron | Color: | Black |
| Temperature: | 40-120 |
TS5208N111E78
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
OSE5KN-6-12-108
TS3674N37
TS5013N69
TS3653N13E8
TS5420
TS2640N181E100
TS4507N1205E200
TS3166N43
TS3679N2E1
TS5208N131
TS3653N1E1
TS5641N150
TS2640N321E64
TS4507N1229E200
TS3212N32
RFH102422
TS3679N3E1
TS5208N111E78
TS3617N47E4
TS1508N211
TS2650N11E78
TS4507N2000E100
TS3214N12
RFH1024-22-1M-68
TS3682N1
TS3617N1E1
TS3624N1E1
TS1508N255
TS2651N111E78
TS4507N2070E100
TS3214N13
RFH102422IM
TS3682N2
TS3617N1E2
TS3624N21E1
TS1508N257
TS26541N131E78
TS4507N2405E200
TS3214N15
TA8110N2121E802
TS3684N11E3
TS3617N2E4
TS3624N21E2
TS1508N260
TS3033N4E2
TS4507N6205E200
TS3214N16
TA8110N2121E916
TS3684N12E6
TS3630N11E1
TS3624N1E2
TS1613N200
TS3063N15E8
TS4507N8029E200
TS3214N44
TS1446N4
TS3684N13E8
TS3664N2E4
TS3624N102E4
TS16N13E12
TS3103N5037
TS4509N1002E200
TS3218
TS1508N202
TS3684N1E3
TS3653N13E7
| The influence of DC CMV can only be reduced to minimum using the noise suppression function of the input amplifier unit |
channel and the remaining seven channels. The calculated worst case error is 0.7% at 0 °C |
| A certain degradation of measuring accuracy in proportion | |
| to CMV must be expected. The worst case error is generated at 50 VDC between one |
o 60 °C, while the measured error usually lies at ≤ 0.1% at 25 °C.
8 inputs in 4 channel groups
● Programmable measurement type at each channel group
– Voltage
– Current
● Programmable resolution for each channel group (15 bits + sign)
● Any measuring range selection per channel group
● Programmable diagnostics and diagnostic interrupt
● Programmable limit value monitoring for 8 channels
● Programmable hardware interrupt when limit is exceeded
● Programmable hardware interrupt at end of cycle
● High-speed update of measured values at up to 4 channels
● Electrical isolation to the CPU
● Supports parameter reassignment in RUN
Diagnostics
For information on diagnostic messages at the "group diagnostics" parameter, refer to the
table Diagnostic messages of analog input modules.
Terminal assignment
The diagrams below show various wiring options
If you reassign parameters in RUN, the following special characteristic applies.
SF LED is lit:
If a diagnostics was pending prior to reconfiguration, the SF LEDs (on CPU, IM or module)
may be lit even though diagnostics is no longer pending and the module is operating
correctly.
Solution:
● Only assign new parameters if no diagnostics is pending, or
● unplug module and plug it in again.
ps
The channels of SM 331; AI 8 x 16 bits are arranged in four groups of two channels. You
always assign parameters to a group. The interrupt limits form the exception.
The table below shows the relevant configuration of channel groups. The channel group
number is required to program SFC parameters in the user program.Table 6- 10 Assignment of SM 331;AI 8 x 16 Bit channels to channel groupsFor information on programming analog modules, refer to the chapter Programming analog
modules (Page 294).Parameter
Table 6- 11 Overview of parameters of SM 331; AI 8 x 16 BitOperating modes of SM 331; AI 8 x 16 Bit:
● 8-channel mode● 4-channel mode
In this mode, the module changes between the two channels of each group. Since the
module contains four analog/digital converters (ADC), all four ADCs convert simultaneously
for channels 0, 2, 4 and 6. After converting the channels with the even numbers, all ADCs
simultaneously convert for the channels with the odd numbers 1, 3, 5 and 7 (see the figure
below)
odule in 8-channel mode
