TAMAGAWA TS2025N471E69 TS2025N471E69 TS2025N471E69 TS2025N471E69 TS2025N471E69

TS2025N471E69

 We can sell the products of Tamagawa at a Advantage price

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS2651N141E78

TS3653N2E5

TS5246N160

TS5246N473

OIH60-8192P24-L6-5V

TS2651N141E78

TS5667N120

TS5667N420

TS5308N616

TS3462N1E76

TS2651N1E78

TS2651N131E78

TS2014N181E32

TS3103N40

TS3653N2E5

TS3653N3E8

TS3684N1E3

TS3684N2E6

TS3684N3E8

TS3667N3E8

TS3624N2E3

TS3624N2E4

TS3624N3E6

TS3630N1E1

TS3630N2E3

TS3630N1306

TS3630N1303E9

TS3630N1214E3

TS5013N60

TS5013N61

TS5016N60

TS5013N63

TS5013N64

TS5016N61

TS5013N66

TS5016N63

TS5016N64

TS5017N60

TS5019N60

TS5420N60

TS5778N155

TS5013N68

TS5013N69

TS5208N131

TS5208N23

TS2025N471E69TS2025N471E691E32

TS5208N111E78

TS5208N141E78

TS5631N224

PULSE

GENERATOR

RP-182

750PPR

PULSE

GENERATOR

RP-182

1500PPR

PULSE

GENERATORRP-482E,750PPR

Reaction of the PS 307; 5A power supply module to atypical operating conditions If ... ... then ... 24 V DC LED the output circuit is overloaded: • I > 6.5 A (dynamic) •

5 A < I ≤ 6.5 A (static) Voltage dip, automatic voltage recovery Voltage drop, reduction of service life Flashing short-circuit at the output Output voltage 0 V; automatic voltage recovery after short-circuit is eliminated off overvoltage on primary side risk of destruction - undervoltage on primary side Automatic shutdown; automatic voltage recovery

SIPLUS modules have a separate order number (see the table below.)
The mechanical/climatic environmental conditions and the method of testing these have
changed. The SIPLUS modules are specified:
● For deployment in harsh environmental conditions,
● For use in hostile environments.
● For extreme temperature ranges.
For more on this, read section Environmental conditions for the operation of SIPLUS
modules (Page 30).
Project design in STEP 7
SIPLUS modules are not included in the hardware catalog. Please design your plant
based on the relevant "standard" modules shown in the table below.
This following table contains all SIPLUS modules available at the time of publication.
In addition, we included the order numbers of the corresponding "standard" modules to
support project design. You can refer to specifications and technical data in the special
"standard" module section.
You´ll find more information on SIPLUS and contact partners in the Internet
Application class: according to IEC 721-3-3, Class 3M4.
Test of mechanical environmental conditions
The table provides information on the type and scope of the test of mechanical
environmental conditions for SIPLUS modules.
Table 1- 3 SIPLUS Modules: Test of mechanical environmental conditions
The SIPLUS modules may also be used under the following climatic, chemical,
biological and mechanical environmental conditions:
ISA –S71.04 severity level GX: Dauerbelastung/long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm;
HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
limit value (max. 30 min/d): SO2 < 14.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm;
NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm
2) When operated in harmful gas environments, the supplied plug covers must remain on the non-used port.
Various 24-VDC power supply modules are available for your PLC and the
sensors/actuators.
Power supply modules
This chapter contains the technical data of the power supply modules.
In addition to technical data, this chapter describes:
● The characteristics
● Wiring diagram
● Block Diagram
● Line protection
● Reaction to atypical operating conditions
Power supply modules
2.1 Power supply module PS 307; 2 A; (6ES7307-1BA01-0AA0)
Module data
Manual, 06/2017, A5E00105505-AJ 33
2.1 Power supply module PS 307; 2 A; (6ES7307-1BA01-0AA0)
Order number
6ES7307-1BA01-0AA0
Properties
Properties of the PS 307; 2 A power supply module:
● Output current 2 A
● Output voltage 24 V DC; short circuit-proof, open circuit-proof
● Connection to singlephase AC mains
(rated input voltage 120/230 V AC, 50/60 Hz)
● safe electrical isolation in accordance with EN 60 950 (SELV)
● May be used as load power supply
The mains supply of the PS 307; 2A power supply module should be protected with a
miniature circuit-breaker (for example 5SN1 series) of the following rating:
● Rated current at 230 V AC: 3 A
● Tripping characteristics (type): C.
the output circuit is overloaded:
• I > 2.6 A (dynamic)
• 2 A < I ≤ 2.6 A (static)
Voltage dip, automatic voltage recovery
Voltage drop, reduction of service life
Flashing
short-circuit at the output Output voltage 0 V; automatic voltage recovery after shortcircuit
is eliminated
off
overvoltage on primary side risk of destruction -
undervoltage on primary side Automatic shutdown; automatic voltage recovery
Properties of the PS 307; 5 A power supply module:
● Output current 5 A
● Output voltage 24 V DC; short circuit-proof, open circuit-proof
● Connection to singlephase AC mains
(rated input voltage 120/230 V AC, 50/60 Hz)
● safe electrical isolation in accordance with EN 60 950 (SELV)
● May be used as load power supply
The mains supplies of the PS 307; 5 A power supply module should be protected with a
miniature circuit-breaker (for example 5SN1 series) of the following rating:
● Rated current at 230 V AC: 6 A
● Tripping characteristics (type): C.
Reaction to atypical operating conditions
Table 2- 2 Reaction to atypical operating conditions of the PS 307; 5 A power supply module
If ... ... then ... DisplayDC 24 V
the output circuit is overloaded:
• I > 6.5 A (dynamic)
• 5 A < I ≤ 6.5 A (static)
Voltage dip, automatic voltage recovery
Voltage drop, reduction of service life
flashes
short-circuit at the output Output voltage 0 V; automatic voltage recovery after short-circuit
is eliminated
off
overvoltage on primary side risk of destruction -
undervoltage on primary side Automatic shutdown; automatic voltage recovery
6ES7307-1KA02-0AA0
Properties
Properties of the PS 307; 10 A power supply module:
● Output current 10 A
● Output voltage 24 V DC; short circuit-proof, open circuit-proof
● Connection to singlephase AC mains
(rated input voltage 120/230 V AC, 50/60 Hz)
● safe electrical isolation in accordance with EN 60 950 (SELV)
● May be used as load power supply
The mains supplies of the PS 307;10 A power supply module should be protected with a
miniature circuit-breaker (for example 5SN1 series) of the following rating:
● Rated current at 230 V AC: 10 A
● Tripping characteristics (type): C.
.output circuit is overloaded:
• I > 13 A (dynamic)
• 10 A < I ≤ 13 A (static)
Voltage dip, automatic voltage recovery
Voltage drop (reduction of service life) flashes
short-circuit at the output Output voltage 0 V; automatic voltage recovery after
short-circuit is eliminated
off
overvoltage on primary side risk of destruction -
undervoltage on primary side Automatic shutdown; automatic voltage recovery
Properties of the PS 305 power supply module (2 A):
● Output current 2 A
● Output voltage 24 V DC; short circuit-proof, open circuit-proof
● Connection to DC power supply
(rated input voltage 24/48/72/96/110 V DC)
● safe electrical isolation in accordance with EN 60 950 (SELV)
● May be used as load power supply
The mains supply of the PS 305 power supply module (2 A) should be protected with a
miniature circuit-breaker (for example 5SN1 series) of the following rating:
● Rated current at 110 V DC: 10 A
● Tripping characteristics (type): C.
the output circuit is overloaded:
• I > 3.9 A (dynamic)
• 3 A < I ≤ 3.9 A (static)
Voltage dip, automatic voltage recovery
Voltage drop, reduction of service life
Flashing
... short-circuit at the output Output voltage 0 V; automatic voltage recovery
after short-circuit is eliminated
off
overvoltage on primary side risk of destruction -
undervoltage on primary side Automatic shutdown; automatic voltage recovery off

6AG1307-1EA80-2AA0
Properties
Properties of the PS 307; 5 A power supply module:
● Output current 5 A
● Output voltage 24 V DC; short circuit-proof, open circuit-proof
● Connection to singlephase AC mains
(rated input voltage 120/230 V AC, 50/60 Hz)
● safe electrical isolation in accordance with EN 60 950 (SELV)
● May be used as load power supply
"24 V DC output voltage present" display
② Terminals for 24 V DC output voltage
③ Strain relief
④ Mains and protective conductor terminals
⑤ 24 V DC On/Off switch
⑥ Mains selector switch

Topical structure of this chapter: 1. Chapter overview of which modules are available and described here 2. Overview of essential module properties 3. Steps in selecting and commissioning the digital module 4. General information, i.e. global data applicable to all digital modules (parameter assignment and diagnostics, for example) 5. Module-specific information (properties, connection and block diagrams, technical data and special features of the module): a) for digital input modules b) for digital output modules c) for relay output modules d) for digital IO modules