TAMAGAWA TS5007N122 TS5007N122 TS5007N122 TS5007N122 TS5007N122 TS5007N122

TS5007N122

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS3617N2E6

TS3617N2E7

TS3617N3E8

TS3617N3E9

TS3617N3E1

TS3617N11E3

TS3617N11E1

TS3617N11E2

TS3617N12E4

TS3617N12E5

TS3617N12E6

TS3617N12E7

TS3617N13E8

TS3617N13E9

TS3617N13E1

TS3653N1E1

TS3653N1E2

TS3653N1E3

TS3653N2E4

TS3653N2E5

TS3653N2E6

TS3653N3E7

TS3653N3E8

TS3653N3E9

TS3653N11E1

TS3653N11E2

TS3653N11E3

TS3653N12E4

TS3653N12E5

TS3653N12E6

TS3653N13E7

TS3653N13E8

TS3653N13E9

TS3103N40

TS3641N1E1

TS3641N2E3

TS3641N11E1

TS3641N12E3

Front connector in screw-type connection system or in push-in system (35 mm width) or
push-in system for 25 mm modules
● same mechanical design, same handling and same accessories for all modules
● components required for shielding are included in the scope of delivery and allow simple
and quick installation without the use of tools
● same pin assignment for wiring, which means that circuit diagrams and wiring plans can
be universally used
● any combination of narrow and wide modules
● can be used centrally in and in ET 200MP distributed I/O system
Overview of functions
In the following you will find a brief overview of special functions of the modules. A detailed
description of the functions is available in the device manual of the module.
Measuring range adjustment of the analog input module AI 8xU/I HF
The function adjusts the measuring range to the sensor. You can increase the resolution for
a configurable part of the measuring range in format. This means that the measured
signal is resolved precisely to more decimal places around a specific operating point

ith measured value scaling, you display the user data of the module in REAL format (32-bit
floating point) instead of format. You can thus directly assign a technological variable to
the analog value of the module. The conversion is made directly in the module, which saves
power and cycle time in the CPU.
You can combine the measured value scaling with the measuring range adjustment. In this
case, the measuring range is adjusted first and then the representation of the measured
value is scaledThe following analog modules offer you the calibration function at runtime:
● AI 8xU/I/RTD/TC ST
● AI 8xU/I HS
● AI 4xU/I/RTD/TC ST
● AI 4xU/I/RTD/TC / AQ 2xU/I ST
The calibration compensates for influences on the measuring result by cables and/or
temperature. A calibration checks the process values output by the analog input module,
determines the deviation from the actual values and compensates for measuring errors.
Typical use:
● for plants in which sensors detect relatively small voltages or currents
● for applications which require regular calibration for all components in a measuring circuit.
Oversampling of the AI 8xU/I HS analog input module
Oversampling divides a PROFINET bus cycle into equidistant bus sub-cycles. This requires
isochronous mode.
Oversampling acquires data with high time resolution but without using an extremely short
PROFINET bus cycle and thus fast CPU cycles. Use for quality-monitoring measurements,
for example when recording pressure trends during the blowing process of PET bottle
productionAnalog output modules convert a 16-bit digital value into current or voltage and output it at
the process. With the analog output modules you control, for example, proportional valves or
small servo drives.