TAMAGAWA TS5312N616 TS5312N616 TS5312N616 TS5312N616 TS5312N616 TS5312N616

TS5312N616

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS5208N111E78

TS5208N141E78

TS3684N1E3

TS3684N13E8

TS3617N1E3

TS3617N1E1

TS3617N1E2

TS3617N2E4

TS3630N11E1

TS3664N2E4

TS3653N13E7

TS3653N12E6

TS3653N2E5

TS3624N2E3

TS3653N13E9

TS3653N2E6

TS3653N3E7

TS3653N3E8

TS3653N3E9

TS1980N43E12

TS1980N56E12

TS1981N134E9

TS1981N53E19

TS1981N56E19

TS1981N56E19

TS1982N126E6

TS1982N128E6

TS1982N53E6

TS1982N56E18

TS1983N146E5

TS252N30E1

To enable the Web server, follow these steps:
1. Select the CPU in the Device Configuration view.
2. In the inspector window, select "Web server" from the CPU properties.
3. Select the check box for "Enable Web server on this module".
4. To require secure access to the Web server, select the "Permit access only with HTTPS"
check box.
WARNING
Unauthorized access to the CPU or changing PLC variables to invalid values could
disrupt process operation and could result in death, severe personal injury and/or
property damage.
Because enabling the Web server allows "admin" users to perform operating mode
changes, writes to PLC data, and firmware updates, Siemens recommends that you
observe the following security practices:
 Enable access to the Web server only with the HTTPS protocol.
 Password-protect the CPU (Page 164) with a strong password. Strong passwords
are at least eight characters in length, mix letters, numbers, and special characters,
are not words that can be found in a dictionary, and are not names or identifiers that
can be derived from personal information. Keep the password secret and change it
frequently.
 Perform error-checking and range-checking on your variables in your program logic
because Web page users can change PLC variables to invalid values.
After you download the device configuration, you can use the standard Web pages to access
the CPU. If you select "Enable" for "Automatic update", standard Web pages refresh every
ten seconds.
If you created user-defined Web pages, you can access them from the standard Web page
menu.
Note
If a "Download in RUN" (Page 690) is in progress, standard and user-defined Web pages do
not update data values or permit you to write data values until the download is complete. Any
attempts to write data values while the download is in progress are discarded. To access the S7-1200 standard Web pages from a PC, follow these steps:
1. Ensure that the S7-1200 and the PC are on a common Ethernet network or are
connected directly to each other with a standard Ethernet cable.
2. Open a Web browser and enter the URL "http://ww.xx.yy.zz", where "ww.xx.yy.zz"
corresponds to the IP address of the S7-1200 CPU.
The Web browser opens the Introduction page.
Note
If your Internet access prevents direct connection to an IP address, see your IT
administrator. Your Web environment or operating system might also impose other
constraints (Page 558).
Alternatively, you can address your Web browser to a specific standard Web page. To do so,
enter the URL in the form "http://ww.xx.yy.zz/<page>.html", where <page> corresponds to
one of the standard Web pages:
● start (Page 509) - general information about the CPU
● identification (Page 510) - detailed information about the CPU including serial, order, and
version numbers
● module (Page 511) - information about the modules in the local rack
● communication (Page 513) - information about the network addresses, physical
properties of the communication interfaces, and communication statistics
● diagnostic (Page 510) - the diagnostic buffer
● variable (Page 515) - CPU variables and I/O, accessible by address or PLC tag name
● datalog (Page 516) - data log files stored internally in the CPU or on a memory card