 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5308N616 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5308N616: | TS5308N616 |
|---|---|---|---|
| Japan: | Japan | Material: | Iron |
| Color: | Black | Temperature: | 30-90 |
| Wire: | Wire | Dimension: | 30mm |
TS5308N616
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3134N52
OSE5K-6-12-108
TS3667N13E8
TS5013N68
TS3653N12E5
TS5320N632
TS2640N141E172
TS4507N1202E200
OSE5KN-6-12-108
TS3674N37
TS5013N69
TS3653N13E8
TS5420
TS2640N181E100
TS4507N1205E200
TS3166N43
TS3679N2E1
TS5208N131
TS3653N1E1
TS5641N150
TS2640N321E64
TS4507N1229E200
TS3212N32
RFH102422
TS3679N3E1
TS5208N111E78
TS3617N47E4
TS1508N211
TS2650N11E78
TS4507N2000E100
TS3214N12
RFH1024-22-1M-68
TS3682N1
TS3617N1E1
TS3624N1E1
TS1508N255
TS2651N111E78
This changing of filter times can result in unexpected machine or process operation,
| This changing of filter times can result in unexpected machine or process operation, | a power cycle of the CPU must be applied. Software limit switches limit the "working range" of the axis. They should fall inside the |
| which may cause death or serious injury to personnel, and/or damage to equipment. |
hardware limit switches relative to the travel range |
| To ensure that a new filter time goes immediately into effect, | Because the positions of the software limit switches can be set flexibly, |
the working range of the axis can be restricted on an
individual basis depending on the current traversing profile. In contrast to hardware limit
switches, software limit switches are implemented exclusively by means of the software and
do not require their own switching elementsIf software limit switches are activated, an active motion is stopped at the position of the
software limit switch. The axis is braked at the configured deceleration. The following
diagram presents the behavior of the axis until it reaches the software limit switches. The axis brakes to a standstill at the configured deceleration.
A [Velocity]
B Working range
C Distance
D Lower software limit switch
E Upper software limit switch
Use additional hardware limit switches if a mechanical endstop is located after the software
limit switches and there is a risk of mechanical damage.
Your user program can override the hardware or software position limits by enabling or
disabling both hardware and software limits functionality. The selection is made from the
Axis DB.
● To enable or disable the hardware limit functionality, access the "Active" tag (Bool) in the
DB path "<axis name>/Config/PositonLimits_HW". The state of the "Active" tag enables
or disables the use of hardware position limits.
● To enable or disable software position limit functionality, access "Active" tag (Bool) in the
DB path "<axis name>/Config/Position Limits_SW". The state of this "Active" tag enables
or disables the software position limits.
You can also modify the software position limits with your user Homing refers to the matching of the axis coordinates to the real, physical drive position. (If
the drive is currently at position x, the axis will be adjusted to be in position x.) For positioncontrolled
axes, the entries and displays for the position refer exactly to these axis
coordinates.
Note
