 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS2014N181E32 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | TS2014N181E32: | TS2014N181E32 |
| Temperature: | 20-90 | Japan: | Japan |
| Wire: | Wire | Dimension: | 70mm |
TS2014N181E32
| N Bool Control parameter enabled to receive: When EN_R = 1, | 1: Estavblish and hold connection LEN IN UInt Maximum number of bytes to be sent (TSEND_C) or received (TRCV_C): |
| Default = 0: The DATA parameter determines the length of the data to be sent (TSEND_C) or received (TRCV_C). |
|
| CONT IN Bool 0: Disconnect | Default = 0: The DATA parameter determines the length of the data to be sent (TSEND_C) or received (TRCV_C). |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5016N63
TS5016N64
TS5017N60
TS5019N60
TS5420N60
TS5778N155
TS5013N68
TS5013N69
TS5208N131
TS5208N23
TS2025N471E69
TS2014N181E32
TS5208N111E78
TS5208N141E78
TS5631N224
PULSE
GENERATOR
RP-182
750PPR
PULSE
GENERATOR
RP-182
1500PPR
PULSE
GENERATORRP-482E,750PPR
ROTALY
ENCODER
RP-112A-T1,750PPR
ROTALY
Ad hoc mode = 65535: A variable length of data is set for
reception (TRCV_C).
CONNECT IN_OUT TCON_Param Pointer to the connection description
DATA IN_OUT Variant Contains address and length of data to be sent (TSEND_C)
Contains start address and maximum length of received
data (TRCV_C).
COM_RST IN_OUT Bool Allows restart of the instruction:
0: Irrelevant
1: Complete restart of the function block, existing connection
will be terminated.
DONE OUT Bool 0: Job is not yet started or still running.
1: Job completed without error.
BUSY OUT Bool 0: Job is completed.
1: Job is not yet completed. A new job cannot be triggered.
ERROR OUT Bool Status parameters with the following values:
0: No error
1: Error occurred during processing. STATUS provides
detailed information on the type of error.
STATUS OUT Word Status information including error information. (Refer to the
"Error and Status Parameters" table below.)
RCVD_LEN
(TRCV_C)
OUT Int Amount of data actually received, in bytes The TSEND_C instruction requires a low-to-high transition at the REQ input parameter to
start a send job. The BUSY parameter is then set to 1 during processing. Completion of the
send job is indicated by either the DONE or ERROR parameters being set to 1 for one scan.
During this time, any low-to-high transition at the REQ input parameter is ignored. The default setting of the LEN parameter (LEN = 0) uses the DATA parameter to determine
the length of the data being transmitted. Ensure that the DATA transmitted by the TSEND_C
instruction is the same size as the DATA parameter of the TRCV_C instruction. The following functions describe the operation of the TSEND_C instruction:
● To establish a connection, execute TSEND_C with CONT = 1.
● After successful establishing of the connection, TSEND_C sets the DONE parameter for
one cycle.
● To terminate the communication connection, execute TSEND_C with CONT = 0. The
connection will be aborted immediately. This also affects the receiving station. The
connection will be closed there and data inside the receive buffer could be lost
