TAMAGAWA TS5214N561 TS5214N TS5214N561 TS5214N561 TS5214N561561 TS5214N561

TS5214N561

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS3653N1E2

TS3653N2E4

TS3653N2E5

TS3653N2E6

TS3653N3E7

TS3653N3E8

TS3653N3E9

TS3653N13E9

TS3653N44E8

TS3653N4E12

TS3653N14E12

TS3653N58E5

TS3653N65E27

TS3653N81E27

TS3653N78E5

TS3653N94E5

TS3653N181E8

TS3658N3

TS3664N1E1

TS3664N1E2

TS3664N2E3

TS3664N2E4

TS3664N50

TS3664N50

TS3667N1E2

TS3667N11E2

TS3667N2E5

TS3667N2E6

TS3667N3E7

TS3667N3E8

TS3667N13E8

TS3674N37

TS3679N2E1

TS3679N3E1

TS3682N1

TUSEND and TURCV send and receive data.
● TDISCON disconnects the communication between the client and server.
Refer to TCON, TDISCON, TSEND, and TRCV (Page 439) in the "TCP and ISO-on-TCP"
section for more information on the TCON and TDISCON communication instructions.
The TUSEND instruction sends data via UDP to
the remote partner specified by the parameter
ADDR.
To start the job for sending data, call the TUSEND
instruction with REQ = 1. he TURCV instruction receives data via UDP.
The parameter ADDR shows the address of the
sender. After successful completion of TURCV, the
parameter ADDR contains the address of the
remote partner (the sender).
TURCV does not support ad hoc mode.
To start the job for receiving data, call the TURCV
instruction with EN_R = 1TCON, TDISCON, TUSEND, and TURCV operate asynchronously, which means that the job
processing extends over multiple instruction executions. Starts the send job on a rising edge. The data is transferred from
the area specified by DATA and LEN.
EN_R
(TURCV)
IN Bool  0: CPU cannot receive.
 1: Enables the CPU to receive. The TURCV instruction is
ready to receive, and the receive job is processed.
ID IN Word Reference to the associated connection between the user
program and the communication level of the operating system.
ID must be identical to the associated parameter ID in the local
connection description.
Range of values: W#16#0001 to W#16#0FFF.
LEN IN UInt Number of bytes to be sent (TUSEND) or received (TURCV).
 Default = 0. The DATA parameter determines the length of
the data to be sent or received.
 Otherwise, range of values: 1 to 1472
DONE
(TUSEND)
IN Bool Status parameter DONE (TUSEND):
 0: Job is not yet started or still running.
 1: Job completed without error.
NDR
(TURCV)
OUT Bool Status parameter NDR (TURCV):
 0: Job not yet started or still running.
 1: Job has successfully completed.
BUSY OUT Bool  1: Job is not yet completed. A new job cannot be triggered.
 0: Job has completed.
ERROR OUT Bool Status parameters with the following values:
 0: No error
 1: Error occurred during processing. STATUS provides
detailed information on the type of error.
STATUS OUT Word Status information including error information. (Refer to the Error
and Status condition codes in the table below.)Address of the sender area (TUSEND) or receive area
(TURCV):
 The process image input table
 The process image output table
 A memory bit
 A data block
ADDR IN_OUT Variant Pointer to the address of the receiver (for TUSEND) or sender
(for TURCV) (for example, P#DB100.DBX0.0 byte 8). The
pointer may point to any memory area.
A structure of 8 bytes is required as follows:
 First 4 bytes contain the remote IP address.
 Next 2 bytes specify the remote port number.