TAMAGAWA TS5013N61 TS5013N61 TS5013N61 TS5013N61 TS5013N61 TS5013N61 TS5013N61

TS5013N61,

Please contact with “Tommy” for the price

TS5312N616-2000C-T

TS5312N616

TS5217N530

DIH35-5000C/T-P8-L6-5V

OIH100-1024C/T-P2-12V

TS5233N430

DIH48-6000C/T-P8-L6-5V

TS5246N430

TS1857N112

TS5213N551

TS5214N364

TS5312N512-2000C/TOSE.5KN-6-12-108

TS5146N11

BKO-NC6214

TS5214N500

48-2500PA-L6-5V

TS5205N4540IH60-8192C/T-P8-L6-5V

TS3699N172

TS3653N3E8

1510N122

TS3653N1E2

TS5667N120

TS3624N2E3

TS3738N1E7

TS2151N1E45

TS3699N232

TS3653N3E9

2000144

TS3653N2E4

TS5778N155

TS3624N2E4

TS4559N3E15

TS2151N11E45

TS3738N1E7

TS1980N43E12

482048P6L65V

TS3653N2E5

TS5778N157

Uniform engineering for standard and safety automation
● Simple documentation of safety-related changes via the F change history in STEP 7
Safety
● Support in the acceptance of the safety program and no renewed acceptance of the
safety program after changes in the standard programStart-up of the system is only possible with unlocked emergency stop, closed protective door
and free protection area of the laser scanner. After activating the emergency stop, opening
the protective door or addressing the protection area, a user acknowledgement is required to
restart production operations again. Access protection to the F-CPU and the safety program
is essential for productive operatioUse of a F-CPU with fail-safe modules in the distributed I/O system
ET 200SP on the PROFINET IO.
The F modules ET 200SP take over the connections for emergency stop, monitoring of the
protective door, monitoring of the access area, the motor and the user acknowledgment.
Perform the programming in the TIA Portal. The safety program runs in the CPU. Safety Integrated provides you with the following advantages:
● Engineering with STEP 7 Safety Advanced in the TIA Portal, same engineering
and operating concept for standard and fail-safe automation task
● Use of instructions approved by the German Technical Inspectorate from the system
library Safety in the safety program, e.g. for protective door, emergency stop, monitored
feedback loop circuit and user acknowledgement, saves time and reduces the error rate
● simple connections of PROFIsafe devices via PROFINET and PROFIBUS
● Additional password protection for F-CPU and safety program is set up for IT security.
● Integration in integrated system diagnosticsA detailed description of the topic "Safety Integrated" is available in the programming and
operating manual Safety - Configuring and Programming Safety -
Configuration and Programming Security means protection of technical systems against sabotage, espionage and human
error.
Protection functions
To set up secure networks, the automation system offers an integrated
security concept from authorization levels up to block protection:Protection against unauthorized configuration changes through four authorization levels
and integrated firewall
Know-how protection Protection against unauthorized access and modifications to algorithms by means of password protection
Copy protection Protection against duplication of programs by linking individual blocks with the serial number of the original memory card on the memory card
Locking the CPU Protection against unauthorized access by locking the front cover with a seal or a lockYou can find additional information about security mechanisms of the automation
systems in the "Security" document at S7 controllers It is becoming increasingly necessary to transfer data to external computers in encrypted
form via Intranet or public networks.
CPUs with firmware version 2.0 and higher support the PKI (RFC
5280) with STEP 7 as of V14. This makes the configuration and the operation of Secure
Communication possible, for example: