 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5013N60 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5013N60: | TS5013N60 |
|---|---|---|---|
| Material: | Iron | Color: | Black |
| Japan: | Japan | Temperature: | 20-90 |
| Dimension: | 70mm | Wire: | Wire |
TS5013N60
| ● Receive message start configuration: Configure the CM 1241 to start receiving a message when the communication line is inactive for at least 50 bit times (about 5 milliseconds at 9600 baud = 50 * 1/9600) | . The preceding four end sequence characters are "don’t care" or unselected characters |
| ● Receive message end configuration: Configure the CM 1241 to end a message when it receives a maximum of 100 bytes or a linefeed character (10 decimal or A hexadecimal) | The CM 1241 does not evaluate the "don’t care" characters but looks for |
| The end sequence allows up to five end characters in sequence. The fifth character in the sequence is the linefeed character | preceded by zero or more "don’t care" characters to indicate the message end |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS4503N1828E100
TS3103N302
OAH14BSD
TS3667N1E2
TS5013N63
TS3641N32
TS5213N550
TS5210N530
TS4503N2000E100
TS3103N40
OAS66
TS3667N11E2
TS5016N61
TS3641N38
TS5213N551
TS5210N54
TS4503N2070E100
TS3132N32
OAS66
TS1857N16EP
TS3667N2E5
TS5016N63
TS3643N2
TS5308N510
TS20E12
TS4503N2202E200
TS3134N21
TS3667N2E6
TS5016N64
TS3643N212E5
TS530N33E9
TS2151N121E9
TS4503N2036E501
TS3134N22
OIS1000CT3L5V108
TS3667N3E7
TS5017N60
For RS422 mode, there are three operating modes depending on your network configuration. Select one of these operating modes based on the devices in your network. The different selections for Receive line initial state reference the cases shown below for more details. ● Full duplex (RS422) four wire mode (point-to-point connection): select this option when there are two devices on your network. In the Receive line initial state: – Select none when you supply the bias and termination (Case 3). – Select forward bias to use internal bias and termination (Case 2). – Select reverse bias to use internal bias and termination, and enable cable break detection for both devices (Case 1). ● Full duplex (RS422) four wire mode (multipoint master): select this option for the master device when you have a network with one master and multiple slaves. In the Receive line initial state: – Select none when you supply the bias and termination (Case 3). – Select forward bias to use internal bias and termination (Case 2). – Cable break detection is not possible in this mode. ● Full duplex (RS422) four wire mode (multipoint slave): Select this option for all the slave devices when you have a network with one master and multiple slaves. In the Receive line initial state: – Select none when you supply the bias and termination (Case 3). – Select forward bias to use internal bias and termination (Case 2). – Select reverse bias to use internal bias and termination, and enable cable break detection for the slaves (Case 1)Mode of operation: RS422 ● Receive line initial state: Reverse bias (biased with R(A) > R(B) > 0V) ● Cable break: Cable break detection enabled (transmitter always active) ● Mode of operation: RS422 ● Receive line initial state: Forward bias (biased with R(B) > R(A) > 0V) ● Cable break: No cable break detection (transmitter enabled only while transmitting) ● Mode of operation: RS422 ● Receive line initial state: no bias ● Cable break: No cable break detection (transmitter enabled only while transmitting) Bias and termination are added by the user at the end nodes of the network
