TAMAGAWA TS5214N561 TS5214N561 TS5214N561 TS5214N561 TS5214N561 TS5214N561

TS5214N561

Please contact with “Tommy” for the price

TS3617N12E7

TS3617N13E8

TS3617N13E9

TS3617N13E1

TS3653N1E1

TS3653N1E2

TS3653N1E3

TS3653N2E4

TS3653N2E5

TS3653N2E6

TS3653N3E7

TS3653N3E8

TS3653N3E9

TS3653N11E1

TS3653N11E2

TS3653N11E3

TS3653N12E4

TS3653N12E5

TS3653N12E6

TS3653N13E7

TS3653N13E8

TS3653N13E9

TS3103N40

TS3641N1E1

TS3641N2E3

TS3641N11E1

TS3641N12E3

TS3664N1E1

TS3664N1E2

TS3664N2E3

TS3664N2E4

TS3664N11E1

TS3664N11E2

TS3664N12E3

StandardStartWeekday USInt Weekday of winter time:
 1 = Sunday
 ...
 7 = Saturday
StandardStartHour USInt Hour of the winter time
Time Zone Name STRING [80] Name of the zone:
(GMT +01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna String data is stored as a 2-byte header followed by up to 254 character bytes of ASCII
character codes. A String header contains two lengths. The first byte is the maximum length
that is given in square brackets when you initialize a string, or 254 by default. The second
header byte is the current length that is the number of valid characters in the string. The
current length must be smaller than or equal to the maximum length. The number of stored
bytes occupied by the String format is 2 bytes greater than the maximum length.
Initialize your String data
String input and output data must be initialized as valid strings in memory, before execution
of any string instructions.
Valid String data
A valid string has a maximum length that must be greater than zero but less than 255. The
current length must be less than or equal to the maximum length.
Strings cannot be assigned to I or Q memory areas.
For more information see: Format of the String data type (Page 97).
8.2.2 S_MOVE instruction
Table 8- 18 String move instruction
LAD / FBD SCL Description

out := in; Copy the source IN string to the OUT location. S_MOVE execution does not affect
the contents of the source string.
Table 8- 19 Data types for the parameters
Parameter Data type Description
IN String Source string
OUT String Target address
If the actual length of the string at the input IN exceeds the maximum length of a string
You can convert number character strings to number values or number values to number
character strings with these instructions:
● S_CONV converts (number string to a number value) or (number value to a number
string)
● STRG_VAL converts a number string to a number value with format options
● VAL_STRG converts a number value to a number string with format options
S_CONV (String to value conversions)
Table 8- 20 String conversion instruction
LAD / FBD SCL Description
out :=
<Type>_TO_<Type>(in);
Converts a character string to the corresponding value, or a value
to the corresponding character string. The S_CONV instruction
has no output formatting options. This makes the S_CONV
instruction simpler, but less flexible than the STRG_VAL and
VAL_STRG instructions.
1 For LAD / FBD: Click the "???" and select the data type from the drop-down list.
2 For SCL: Select S_CONV from the Extended Instructions, and answer the prompts for the data types for the conversion.
STEP 7 then provides the appropriate conversion instruction.
Table 8- 21 Data types (string to value)
Parameter and type Data type Description
IN IN String Input character string
OUT OUT String, Char, SInt, Int, DInt, USInt, UInt, UDInt, Real, LReal Output number value
Conversion of the string parameter IN starts at the first character and continues until the end
of the string, or until the first character is encountered that is not "0" through "9", "+", "-", or