 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5208N130 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| Tamagawa: | Tamagawa | TS5208N130: | TS5208N130 |
|---|---|---|---|
| Japan: | Japan | Material: | Iron |
| Color: | Black | Temperature: | 30-120 |
| Dimension: | 40mm | Wire: | Wire |
TS5208N130
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5246N164
TS2650N1E78
TS2650N11E78
TS2650N101E78
TS5212N500
TS5308N616
TS5314N616
TS2640N671E110
TS2605N1E64
TS2640N71E10
TS4503N2000E100
TS4503N2000E200
TS5205N456
TS5205N450
TS5205N454
TS1981N56E19
TS1981N56E18
TS2651N111E78
TS2651N181E78
TS2640N321E64
TS5214N566/N8566
TS5208N8566
TS5667N120
TS5667N420
TS2651N181E78
TS2651N141E78
TS6026N151
TA8481N0300
TA8480N0100
TA8480N0200
TS5000N632
TS2014N181E32
TS2651N131E78
TS5667N420
TS5303N510
TS5246N574
TS5208N143
TS4603N1680E200
TS4603N1680E200
TA8480N0000
TS5216N579AU6802N1
TS5213N510TAMAGAWA
TS3624N22E3
TS5238N352
OIH48-2000P8-L6-5V
TS5212N530
TS5214N8566
TS5214N8566
TS5246N160
TS2620N21E11
TS2650N11E78
TS4602N1033E200
TS5668N41
TS5314N510-2500C/T
35-2000P4-L6-5V
TS5668N43
48-5000p8-L6-5V
TS5217N577
TS3641N
4509N1021E100
OIH48-2500P8-L6-5V60
TS2651N141E78
TS3653N2E5
TS5246N160
TS5246N473
OIH60-8192P24-L6-5V
TS2651N141E78
TS5667N120
TS5667N420
TS5308N616
TS3462N1E76
TS2651N1E78
TS2651N131E78
TS2014N181E32
TS3103N40
TS3653N2E5
TS3653N3E8
TS3684N1E3
TS3684N2E6
TS3684N3E8
| The channel conversion time is based on the programmed noise suppression | 50 Hz. The channel conversion time is 65 ms when you set an interference frequency of 60 Hz. |
| The channel conversion time is 76 ms, |
You can reduce channel conversion times to 16 ms by setting an interference frequency of 400 Hz |
| including communication time, at a set interference frequency of | When you set 50, 60 and 400 Hz , the channel conversion time amounts to 88 ms. |
The module then has to switch to a different channel of the group bymeans of the OptoMOS relay. Opto-MOS relays require 7 ms for switching and settling. The
following table shows this relationship.Table 6- 12 Cycle times in 8-channel modeThe converted value settles to 100% within 80 ms and is updated every 10 ms when 4-channel mode isset. The channel and module cycle times are always identical, because themodule does not change between the channels of a group: 10 ms.Channel conversion time = channel cycle time = module cycle time = 10 ms
Set the "disabled" value at the "measuring method" parameter for unused channels. Thissetting reduces module cycle times.
As certain programmed inputs may remain unused due to the channel group configuration in
8-channel mode, make allowances for the special features of these inputs outlined below to
activate the diagnostics functions at the channels being used:● Measuring range 1 V to 5 V: wire the used input and unused input of the same channel
group in parallel.
Current measurement, 4 to 20 mA: Connect unused input in series to the input of the
same channel group. A shunt resistor must be connected for each programmed and
unused channel.
● Other measuring ranges: Short-circuit the plus and minus inputs of the channel.
Line continuity check
The wire break test is available for the voltage measuring range 1 to 5 V and the current
measuring range 4 to 20 mA.
When there is a configured measuring range of 1 to 5 V or 4 to 20 mA and the wire break
test is activated, the analog input module reports a wire break in the diagnostics when
underflow (-32768) is reached.
● The module also triggers a diagnostic interrupt if this function is enabled in the program.
● A wire break can only be signaled by means of the lit SF LED and the diagnostic bytes
must be evaluated in the user program if diagnostic interrupts are disabled.
Under the following circumstances, wire-break detection can take up to 2 s:
