 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5246N160 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | TS5246N160: | TS5246N160 |
| Temperature: | 40-120 | Dimension: | 30mm |
| Wire: | Wire | Japan: | Japan |
TS5246N160
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5308N616
TS3462N1E76
TS2651N1E78
TS2651N131E78
TS2014N181E32
TS3103N40
TS3653N2E5
TS3653N3E8
TS3684N1E3
TS3684N2E6
TS3684N3E8
TS3667N3E8
TS3624N2E3
TS3624N2E4
TS3624N3E6
TS3630N1E1
TS3630N2E3
TS3630N1306
TS3630N1303E9
TS3630N1214E3
TS5013N60
TS5013N61
TS5016N60
TS5013N63
TS5013N64
TS5016N61
TS5013N66
TS5016N63
TS5016N64
TS5017N60
TS5019N60
TS5420N60
TS5778N155
TS5013N68
TS5013N69
TS5208N131
TS5208N23
TS2025N471E69TS2025N471E691E32
TS5208N111E78
TS5208N141E78
TS5631N224
PULSE
GENERATOR
RP-182
750PPR
PULSE
GENERATOR
RP-182
1500PPR
PULSE
GENERATORRP-482E,750PPR
ROTALY
ENCODER
RP-112A-T1,750PPR
ROTALY
ENCODER
RP-112A-T1,1500PPR
ROTALY
ENCODER
RP-112A-T1,3000PPR
ROTALY
ENCODER
RP-132,1500PPR
ROTALY
ENCODER
RP-446Z,750PPR
ROTALY
ENCODER
M-52004
RP872ZL
2048PPR
ROTALY
ENCODER
RP-132A-T1,750PPR
ROTALY
ENCODER
RP-873ZL,2048PPR
ROTALY
ENCODER
RP-886ZN,2500PPR
ROTALY
ENCODER
RP-5354D-CD-4096PPR
ROTALY
| If a wire break occurs during voltage measurement. | The measured value can go through the entire valid value range during the wire break detection. |
| If a wire break occurs on the front-connector jumpers from shunt (250 Ω) to the inputs | When there are configured measuring ranges ± 10 V, ± 5 V, 1 to 5 V or 4 to 20 mA, the wire |
| during current measurement. | reak test is not activated and a diagnostic interrupt is enabled, |
the module triggers a
diagnostic interrupt when the underflow is reached. The module detect the underflow when
the input signal is below 0.296 V or 1.185 mA.
Overflow, underflow and hardware interrupt limits
The limits in diagnostics response to overflow and underflow in certain measuring ranges
differ compared to the listed ranges starting at the chapterAnalog value representation for
analog input channels of the manual. In certain situations the numerical methods of the
module software used to evaluate the process variables do not return values up to 32511.
Do not set any hardware interrupt limits higher than the lowest possible overflow or
underflow response limits. End of cycle interrupt starting at the chapter Analog value
representation for analog input channels.You can synchronize a process with the conversion cycle of the module by enabling the endof cycle interrupt. The interrupt is set when enabled channels have been converted.
he table below shows the contents of the 4 bytes of additional OB40 information during
process or end of cycle interrupts.Certain parameters are not supported when operating an electrically isolated SM 331; AI 8
16 Bit analog input module on an ET200M PROFIBUS slave system in combination with a
PROFIBUS master which is not an S7 master. Non-S7 masters do not support hardware
interrupts. All parameters associated with these functions are disabled for this reason. This
includes hardware interrupt enable, hardware restrictions and end the enabling of cycle
interrupts. All other parameters are allowed.6ES7331-7HF00-0AB0 or 6ES7331-7HF01-0AB0
Properties● 8 inputs in 4 channel groups
● Measurement type programmable for each channel group:– Voltage
– Current
