 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5246N164 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMGAWA: | TAMAGAWA | TS5246N164: | TS5246N164 |
|---|---|---|---|
| Japan: | Japan | Material: | Iron |
| Temperature: | 40-120 | Color: | Black |
| Wire: | Wire |
TS5246N164
| When setting the parameters, select measurement type R "Resistance" and measuring range "PTC |
|
| Connect the PTC (see "Terminal diagram for resistance measurement") | |
| Use PTC resistors that comply with IEC 60034-11-2 (previously, PTC thermistors that complied with DIN/VDE 0660, Part 302). |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
RP-132A-T1,750PPR
ROTALY
ENCODER
RP-873ZL,2048PPR
ROTALY
ENCODER
RP-886ZN,2500PPR
ROTALY
ENCODER
RP-5354D-CD-4096PPR
ROTALY
ENCODER
RP-132A-T1,600PPR
ROTALY
ENCODER
RP-132A,2000PPR
TS2025N471E69
TS2014N181E32
TS5208N111E78
TS5208N141E78
TS3684N1E3
TS3684N13E8
TS3617N1E3
TS3617N1E1
TS3617N1E2
TS3617N2E4
TS3630N11E1
TS3664N2E4
TS3653N13E7
TS3653N12E6
TS3653N2E5
TS3624N2E3
TS3653N13E9
TS3653N2E6
TS3653N3E7
TS3653N3E8
TS3653N3E9
TS1980N43E12
TS1980N56E12
TS1981N134E9
TS1981N53E19
TS1981N56E19
TS1981N56E19
TS1982N126E6
TS1982N128E6
TS1982N53E6
TS1982N56E18
TS1983N146E5
TS252N30E1
TS3503N11E43
TS3062E3
TS3092N11E12
TS3095N2
TS3103N156
TS3103N178
TS3103N255
TS3103N302
TS3103N40
TS3132N32
TS3134N21
TS3134N22
TS3134N317
TS3134N52
TS3166
TS3166N43
TS3212N32
TS3214N12
TS3214N13
TS3214N15
TS3214N16
TS3214N44
TS3218
TS3218N42
TS3218N5
TS3250E12
TS3275N125
TS3153N15E18
TS3602N213E8
TS3602N233E8
TS3602N31E8
TS3617N1E1
TS3617N1E2
Sensor data for the PTC resistor:
Only bits 0 and 2 in the process image input are relevant for evaluation. You can use bits
0 and 2 to monitor the temperature of a motor, for example.Bits 0 and 2 in the process image input cannot be saved. When assigning parameters,make sure that the motor, for example, starts up in a controlled manner (by means of anacknowledgment).Bits 0 and 2 can never be set at the same time; they are set one after the other.● 8 inputs in 4 channel groups● Programmable measurement type at each channel group– Voltage– Current– Resistance
– Temperature
● Programmable resolution at each channel group (9/12/14 bits + sign)
● Any measuring range selection per channel group
● Programmable diagnostics and diagnostic interrupt
● Programmable limit value monitoring for 2 channels
● Programmable hardware interrupt when limit is exceeded
● Electrically isolated to CPU and load voltage (not for 2-wire transducers)
The resolution of measured values is directly dependent of the selected integration time. In
other words, the longer the integration time for an analog input channel, the higher the
resolution of a measured value.
For information on diagnostics messages at the "group diagnostics" parameter, refer to
chapter Diagnostic messages of analog input modules.
Hardware interrupts
Hardware interrupts for channel groups 0 and 1 can be programmed in STEP 7. However,
set a hardware interrupt only for the first channel of a channel group, that is, either atchannel 0, or at channel 2
he diagrams below show various wiring options The input impedance depends on thesetting of the measuring range module, see table Measurement types and ranges.
The interconnection between MANA and M- (terminals 11, 13, 15, 17, 19) is not required whenusing grounded 4-wire transducers with non-isolated supply.Any voltage measurement will destroy the measuring range module if "current" measuring
mode is set.
Resistance measurement" is only available at one channel per group. The "2nd" channelof the group is used accordingly for current measuring mode (IC). The "1st" channel of the
group returns the measured value. The "2nd" channel of the group is assigned the default
overflow value "7FFFH."
• There is no compensation of the line resistance with a 2 and 3-wire connection.
An interconnection of M- and MANA is prohibited when using grounded thermocouples. Inthis case, you must ensure that low-resistance equipotential bonding is in place so thatthe permitted common-mode voltage is not exceeded.
• Interconnect M- and MANA when using non-grounded thermocouplesDimensions W x H x D (mm) 40 x 125 x 117Weight approx. 250 g
Module-specific dataSupports isochronous mode No
Number of inputs• with resistive transducers
84
Cable length• shieldedmax. 200 m
max. 50 m at 80 mV and with thermocouplesVoltages, currents, electrical potentialsRated electronics supply voltage L +• Reverse polarity protection24 V DCYesTransducer power supply• Supply current• short circuit-proofmax. 60 mA (per channel)Yes
Constant current for resistive transducers typ. 1.67 mA (pulsed)Electrical isolation• between channels and the backplane bus• between channels and electronics power supply
– Not for 2-wire transducersYesYesMaximum potential difference
• between inputs and MANA (VCM)– at signal = 0 V
• between inputs (VCM)typ. 2.5 V DC (> 2.3 V DC)typ. 2.5 V DC (> 2.3 V DC)
Isolation test voltage 500 V DCCurrent consumption
• from the backplane bus• from load voltage L+
max. 50 mAmax. 30 mA (without 2-wire transducer)
Power loss of the module typ. 1 WGeneration of analog values
Measuring principle IntegratingIntegration/conversion time/resolution (per channel)
• programmable Yes• Integration time in ms 2.5 162/3 20 100• Basic conversion time, including the integration time in ms 3 17 22 102Additional conversion time for resistance measurement, in msoradditional conversion time for wire-break monitoring in msoradditional conversion time for resistance measurements andwire-break monitoring in ms
