 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS2014N181E32 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| Tamagawa: | Tamagawa | TS2014N181E32: | TS2014N181E32 |
|---|---|---|---|
| Material: | Iron | Color: | Black |
| Temperature: | 30-120 | Dimension: | 40mm |
| Wire: | Wire |
TS2014N181E32
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3624N23E5
TS2014N311E32
TS3617N2E7
TS4509N2405E200
TS3275N125
TS1562N102
TS3692N41
TS3653N13E9
TS2014N18E32
TS2014N312E32
TS3617N3E10
TS4509N7000E100
TS3153N15E18
TS1567N132
TS3692N42
TS3653N2E6
TS2014N43E31
TS2018N303E51
TS3617N3E8
TS4514N1021E200
TS3602N213E8
TS3699N112
TS3653N3E7
TS2058N21E1-A
TS20E12
TS3617N13E8
TS4514N1407E200
TS3602N233E8
TS1857N16
TS4603N1532E200
TS2058N21EAA
TS20N2E11
TS3617N376
TS4514N1828E200
TS3602N31E8
TS-1905N146E6
TS4603N1700E200
| 6ES7322-5HF00-0AB0 | 8 outputs, electrically isolated |
| Properties The relay output module SM 322; DO 8 x Rel. 230 V AC / 5A is characterized by the |
Load voltage 24 to 120 V DC, 24 to 230 V AC |
| following properties: | Suitable for AC solenoid valves, contactors, motor starters, FHP motors and signal lamps |
You can protect the contacts with an RC quenching element by setting a jumper (SJ.)
● Group error display
● Channel-specific status displays
● Programmable diagnostic interrupt
● Programmable substitute value output
● Supports parameter reassignment in RUN
Overvoltage protection of contactsYou can protect the contacts against overvoltage by bridging (SJ) the module terminals 3and 4, 7 and 8, 12 and 13 etc. (see the diagram below).Make allowances for the special feature outlined below when operating the6ES7322-5HF00-0AB0 relay output module on SELV:The horizontally adjacent terminal of a terminal operated on SELV may not be operated at rated voltage higher than 120 VUC. When operated at voltages higher than 120 VUC, thecreepage distances and air gaps in the 40-pin front connector do not meet SIMATICrequirements of safe electrical separation.If one of two horizontally adjacent terminals is operated on SELV, the other terminal may not be
operated at more than 120 VUC.Dimensions W x H x D (mm) 40 x 125 x 117Weight ca. 320 gModule-specific dataSupports parameter reassignment in RUN Yes• Reaction of non-programmed outputs Return the output value which was valid before the
parameterizationSupports isochronous mode noNumber of outputs 8Cable length
• unshielded• shieldedmax. 600 m
max. 1000 mDigital modules
3.35 Relay output modRated electronics supply voltage L+ 24 V DC
• Reverse polarity protection yesTotal current of outputs (per group)• horizontal mounting position up to 60° max. 5 A• vertical mounting position up to 40° max. 5 AElectrical isolation• between channels and the backplane bus yes• between channels and the power supply to relays yes
• between channelsin groups ofyes
1Maximum potential difference
Between Minternal and the power supply to relays and outputs 250 V AC
• Between outputs of different groups 500 V AC
Isolation test voltage
• between Minternal and the power supply to relays 500 V DC
• between Minternal and the power supply to relays and outputs 1500 V AC
• between outputs of different groups 2000 V AC
Current consumption
• from the backplane bus
• from power supply L+
max. 100 mA
max. 160 mA
Power loss of the module typ. 3.5 W
Status, interrupts, diagnostics
Status display green LED per channel
Interrupts
• Diagnostic interrupt programmable
Diagnostic functions programmable
• Group error displ
