TAMAGAWA TS2018N303E51 TS2018N303E51 TS2018N303E51 TS2018N303E51 TS2018N303E51

TS2018N303E51

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS5016N-60

TS5016N60

TS2651N111E78

TS2014N181E32

TS5013N60,

TS5013N61,

TS5016N60,

TS5017N60,

TS5013N68,

TS5

013N69

TS5013N60

TS5016N60

TS5013N60

TS5016N60

TS5017N60

TS5013N68

TS5013N69

TS2014N181E32

TS2014N311E32

TS2650N11E78

TS2650N1E78

TS5081N1

TS5084N250

TS5314N255

TS5303N510

TS5622N131

TS1616N200

TS1501N13

TS5641N154

TS5205N454

TS5668N20

TS5667N120

TS5667N420

TS5308N616

TS3462N1E76

TS5214N561

TS5214N510

TS2014N182E32

TS3653N2E5

TS5320N510

TS5016N60

TS5016N60

TS2651N111E78

TS2014N181E32

TS5208N130

TS5214N566

TS5205N450

TS5205N454

TS2651N11E78

TS2651N141E78

TS2651N1E78

TS2651N131E78

TS3103N40

TS3653N2E5

TS3653N3E8

TS3684N1E3

TS3684N2E6

TS3684N3E8

TS3667N3E8

TS3624N2E3

TS3624N2E4

TS3624N3E6

TS3630N1E1

TS3630N2E3

TS3630N1306

TS3630N1303E9

Rated load voltage 48 VDC to 125 VDC● Suitable for solenoid valves, DC contactors and signal lamps
● Group error display (SF)Use of the module with high-speed countersPlease note when using the module in combination with high-speed counters:NoteWhen using a mechanical contact to switch on the power supply, the outputs ofSM 322; DO 8 x DC 48-125 V/1.5 A will carry a "1" signal for the duration of ca. 50 µs due tothe circuit structure.Digital modules3.30 Digital output module SM 322; DO 8 x DC 48-125 V/1.5 A; (6ES7322-1CF00-0AA0)

Output voltage • "1" signal – At maximum current – At minimum current min. L1 (-1.5 V) min. L1 (-8.5 V) Output current • "1" signal Rated value permissible range at 0 °C to 40 °C permissible range at 40 °C to 60 °C Maximum inrush current (per group) AC 2 A1) 10 mA to 2 A 10 mA to 1 A max. 20 A (max. 1 AC cycle) • "0" signal (residual current) max. 2 mA Output delay (resistive load) • "0" to "1" transition max. 1 AC cycle • "1" to "0" transition max. 1 AC cycle Minimum load current 10 mA Zero transition max. 60 V Size of the motor starter max. size 5 to NEMA Lamp load max. 50 W Wiring two outputs in parallel • for redundant load control supported (only outputs of the same group) • for performance increase not supported Control of a digital input supported Switching frequency • with resistive load • with inductive load to IEC 947-5-1, AC 15 • with lamp load max. 10 Hz max. 0.5 Hz max. 1 Hz Short-circuit protection of the output Fuse, 8 A/250 V; per group • Fuse-tripping current min. 40 A • Response time max. 300 ms Replacement fuses • Wickman • Schurter • Littlefuse 8 A fuse/fast-blow 194-1800-0 SP001.1013 217.008 Fuse holder • Wickman 653 07 Wiring of the actuators using a 20-pin front connector 1) The load currentmust not be half-wave 2) Possible errors: - no load voltage - defective fuseProperties of SM 322; DO 8 x AC 120/230 V/2 A:● 8 outputs, fused and electrically isolated in groups of 4
● Output current 2 A● Rated load voltage 120/230 VACSuitable for AC solenoid valves, contactors, motor● Group error displayChannel number② Status display - greenError LED - red③ Backplane bus interface④ Optotriac
Dimensions W x H x D (mm) 40 x 125 x 117Weight ca. 275 gModule-specific data
Supports isochronous mode noNumber of outputs 8Cable length• unshielded• shielded

. 600 mmax. 1000 m