TAMAGAWA TS5208N569 TS5208N569 TS5208N569 TS5208N569 TS5208N569 TS5208N569

TS5208N569

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS3653N3E7

TS5850N60

TS3630N1303E9

TS5008N66

TS2650N1E78

TS374

TS1981N53E19

61347

TS3653N3E8

TS5850N64

TS3630N1309E5

TS5010N

TS2650N11E78

TS3762N15E4

TS1981N56E19

TS3653N3E9

TS5850N70

TS3630N1306

TS5013N69

TS2650N101E78

TS4126N1017E235

TS1981N56E19

TS3653N13E9

TS5N2E18

TS3630N1E1

TS5013N61

TS2651N111E78

TS4127N1017E215

TS1982N126E6

TS3653N44E8

TS3630N1E2

System power supply (optional)
The ET 200MP distributed I/O system is installed on a mounting rail like the
automation system.
The I/O modules of the ET 200MP distributed I/O system can be used in a
decentralized configuration (with an ET 200MP interface module) or in a centralized
configuration (with an CPU)Interface module
② I/O modules
③ Mounting rail with integrated DIN rail profile
Figure 3-11 Example of a configuration of the ET 200MP with IM 155-5 DP STFail-safe automation systems (F-systems) are used in systems with higher safety
requirements. F-systems control processes and ensure that they are in a safe state
immediately after shutdown. In other words, F-systems control processes in which an
immediate shutdown does not endanger persons or the environment.Safety Integrated is the integrated safety concept for automation and drive technology from
.
Proven technologies and systems from automation technology, such as in
this case, are used for safety systems. Safety Integrated includes the complete safety
sequence, ranging from sensor, actuator and fail-safe modules right through to the controller,
including safety-related communication via standard fieldbuses. Drives and controllers
handle safety tasks in addition to their actual functionsThe figure below contains an example of an F-system Safety with ,
ET 200MP and PROFINET IO.
You can combine fail-safe I/O modules and non-fail-safe I/O modules in a can be combined
in a /ET 200MPconfiguration.
The fail-safe IO controller (F-CPU) exchanges:
● safety-related data with fail-safe modules
● non-safety-related data with non-fail-safe modulesThe following fail-safe I/O modules are available for /ET 200MP:
● Fail-safe digital input modules detect the signal states of safety-related sensors and send
the relevant safety frames to the F-CPU.

Fail-safe digital output modules control actuators for safety-oriented tasks.Interface module
② I/O modules
③ Power supply (optional)
④ Fail-safe I/O modules
⑤ Mounting rail with integrated top-hat rail
Figure 3-13 Configuration example of the ET 200MP with fail-safe I/O modulesYou use the /ET 200MP fail-safe I/O modules:
● in with F-CPUs as of firmware version V1.7
● distributed in ET 200MP with F-CPUs as of firmware version V1.5 and all FCPUs that can be selected in the hardware catalog of the TIA Portal
The following interface modules are required for fail-safe I/O modules in ET 200MP :
● IM 155-5 PN ST, as of firmware version V3.0.0
● IM 155-5 PN HF, as of firmware version V3.0.0
● IM 155-5 DP ST, as of firmware version V3.0.0
To configure and program fail-safe I/O modules /ET 200MP , you need:
● STEP 7 (TIA Portal) as of V13 SP1
● The option package STEP 7 Safety Advanced as of V13 SP1 + HSP0086You can only use the /ET 200MP fail-safe I/O modules in safety mode. They cannot
be used in non-fail-safe mode, i.e. standard mode.Fail-safe I/O modules are equipped with integrated safety functions for safety mode.
You can achieve the safety classes of the table below:
● By corresponding parameter assignment of the safety functions in STEP 7,