The following configurations are possible1 x 32-channel without value status (1 x 16 digital inputs and 1 x 16 digital outputs) V13 or higher X 4 x 8-channel without value status (2 x 8 DI 16x24VDC/ DQ 16x24VDC... Read More
15BRCX-500-G44module ● Program download to CPU Operating mode switchover RUN/STOP Localization of the CPU by means of LED flashing Reading out CPU error information ● Reading the CPU diagnostic buffer ● Reset ... Read More
software is used in the firmware of the I/O modules. Open Source Software is provided free of charge. We are liable for the product described, including the open-source software contained in it, pursuant to the ... Read More
observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring ... Read More
see section Wiring (Page 19). You can find the total current of the outputs for each channel or for each module in the technical specifications.The dimensional drawing of the module on the mounting rail, as ... Read More
Current per group, max. 2 A; see additional description in the manual Current per module, max. 32 A; see additional description in the manual Relay outputs Number of relay outputs 16 Rated input voltage of ... Read More
the assignment of the address space for submodules 1 and 2 and the value status.You will find information on the module-internal shared input/shared output (MSI/MSO) the value statusThe figure below shows the ... Read More
4.3 Address space The module can be configured differently in STEP 7; see following table. Depending on the configuration, additional/different addresses are assigned in the process image output/input. ... Read More
The meaning of the value status depends on the submodule on which it occurs. For the first submodule (=basic submodule), the value status 0 indicates that the value is incorrect or that the IO controller of the ... Read More
Central operation with a CPU Distributed operation on PROFINET IO in an ET 200MP system Distributed operation on PROFIBUS DP in an ET 200MP system For parameter assignment in the user program, the parameters ... Read More
