TS5270N15 Guang Zhou Lai Jie Electric Co.,LTD Please contact with “Tommy” for the price 800123-R-F TS3653N65E27 TS5208N23 TS3630N101E2 TS5017N56 TS5005N122 TS4244N3E24 TS1983N146E5 TS3653N81E27 TS2025N471E69 ... Read More
TS5213N510 Configuration of homing parameters mechanical endstop in the event of a direction reversal: Configure the parameters for active and passive homing in the "Homing" configuration indow. The homing ... Read More
TS2014N181E32 The agreement between the axis coordinates and the real situation is extremely important. There are 4 different homing functions. This step is necessary to ensure that the absolute target position ... Read More
TS5308N616 Guang Zhou Lai Jie Electric Co.,LTD Please contact with “Tommy” for the price TS3134N52 OSE5K-6-12-108 TS3667N13E8 TS5013N68 TS3653N12E5 TS5320N632 TS2640N141E172 TS4507N1202E200 OSE5KN-6-12-108 ... Read More
TS5214N561 Based upon the user’s selection while the CPU is in RUN mode, either the values stored in the image register or the pulse generator outputs drive the digital outputs. cannot be used in the CPU 1211C. ... Read More
TS5214N510 The technology object TO_Axis_PTO V2.0 must be correctly configured. The technology object TO_Axis_PTO V2.0 must be correctly configured. RampUpTime IN Real Time (in seconds) to accelerate from ... Read More
If both the JogForward and JogBackward parameters are simultaneously TRUE, the axis stops with the configured Acceleration = 10.0 and Deceleration = 5.0 deceleration. An error is indicated in parameters "Error"... Read More
by another MC_MoveVelocity task. The abort is signaled via "Abort_1". When the new target velocity 15.0 is The abort is signaled via "Abort_1". When the new target velocity 15.0 is reached, this is signaled via ... Read More
Error OUT Bool TRUE = An error has occurred during execution of the task. ErrorInfo OUT Word Error info ID for parameter "ErrorID" (Default value: 0000) TRUE = During execution the task was aborted by another ... Read More
ErrorID OUT Word Error ID for parameter "Error" Execute:=_bool_in_, Position:=_real_in_, Busy=>_bool_out_, CommandAborted=>_bool_out_, Error=>_bool_out_, ErrorInfo OUT Word Error info ID for parameter "ErrorID... Read More
